FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

Repair Information
4-1
4
Repair Information
This chapter describes repair-related procedures for the Intrepid 6064
Director and associated field-replaceable units (FRUs). The
procedures are performed through the storage area network (SAN)
management application (SANavigator or EFCM), Intrepid 6064
Element Manager application, or SANpilot interface. The following
procedures are described:
• Obtaining log information.
• Obtaining port diagnostic information.
• Performing port diagnostic loopback tests.
• Performing channel wrap tests (FICON only).
• Swapping ports (FICON only).
• Collecting maintenance data.
• Setting the director online or offline.
• Blocking or unblocking Fibre Channel ports.
• Cleaning fiber-optic components.
• Powering the director on and off.
• Performing a director reset, initial machine load (IML), or initial
program load (IPL).
• Managing firmware versions.
• Managing configuration data.
• Installing or upgrading software.