FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

4
4-6
Intrepid® 6064 Director Installation and Service Manual
Repair Information
• Network Address - The IP address or configured name of the
director. This address or name corresponds to the address or
name displayed under the product icon at the physical map.
• Previous Status - The status of the director prior to the reported
status change (Operational, Degraded, Failed, OutofBand Online, or
Unknown). An Unknown status indicates the SAN management
application cannot communicate with the director.
• New Status - The status of the director after the reported status
change (Operational, Degraded, Failed, OutofBand Online, or
Unknown).
Fabric Log To open the Fabric Log, select the option from the Monitor and Logs
menus. The log reflects the time and nature of changes made to a
managed fabric. This information is useful for system administrators
and users. For a log description, refer to the SANavigator Software
Release 4.1 User Manual (621-000013).
Element Manager
Logs
To open a log from the Element Manager application, select the Logs
menu at any view, then click (select) the desired log option.
Intrepid 6064 Audit
Log
To open the Intrepid 6064 Audit Log, select the Audit Log option from
the Logs menu at the Hardware View, Port List View, Node List View,
Performance View, or FRU List View. The log displays a history of user
actions performed through the Element Manager application or a
simple network management protocol (SNMP) management
workstation. This information is useful for system administrators and
users. For a log description and an explanation of button functions,
refer to the McDATA Intrepid 6140 and 6064 Directors Element Manager
User Manual (620-000153).
Intrepid 6064 Event
Log
To open the Intrepid 6064 Event Log, select the Event Log option from
the Logs menu at the Hardware View, Port List View, Node List View,
Performance View, or FRU List View. The log displays (Figure 4-3).