FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

4
4-28
Intrepid® 6064 Director Installation and Service Manual
Repair Information
• Transmitted Frames - The number of Class 3 frames transmitted
by this F_Port to its attached N_Port.
• Discarded Frames - The number of Class 3 frames discarded
(including multicast frames with bad Domain IDs).
• 4-byte words Rx - The number of Class 3, 4-byte words received
by the port.
• 4-byte words Tx - The number of Class 3, 4-byte words
transmitted by the port.
Open Trunking
Statistics
The Open Trunking Statistics include these transmit and receive
values:
• Flows rerouted to ISL - The number of Fibre Channel traffic
flows that were rerouted to this ISL from another ISL due to
congestion. (This value increments only if the OpenTrunking
feature is installed.)
• Flows rerouted from ISL - The number of Fibre Channel traffic
flows that were rerouted from this ISL to another ISL due to
congestion. (This value increments only if the OpenTrunking
feature
Port Properties Page When the SANpilot interface opens, the View panel appears as the
default panel. At the View panel, click the Port Properties tab. The View
panel displays with the Port Properties page selected (Figure 4-15).