FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

4
Set the Director Online or Offline
4-45
Repair Information
4. Click Set Offline. A warning dialog box displays the message
Performing this operation will change the current state to
Offline.
5. Click OK. As the director goes offline, inspect the Hardware View.
The State field of the Intrepid 6064 Status table displays Offline.
Set Online State
(SANpilot Interface)
To set the director online from the SANpilot interface:
1. When the SANpilot interface opens, the View panel and Switch
page appear as the default. At the View panel, select the Operations
option at the left side of the panel. The Operations panel opens
with the Switch page displayed.
2. Click the Online State tab. The Switch page displays with the
Online State tab selected (Figure 4-25).
3. Click Set Online. The director comes online and the message Your
changes have been successfully activated appears.
Figure 4-25 Operations Panel (Switch Page with Online State Tab)
Set Offline State
(SANpilot Interface)
To set the director offline from the SANpilot interface:
1. When the SANpilot interface opens, the View panel and Switch
page appear as the default. At the View panel, select the Operations
option at the left side of the panel. The Operations panel opens
with the Switch page displayed.