FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

4
4-76
Intrepid® 6064 Director Installation and Service Manual
Repair Information
2. At the SAN management application physical map, right-click
the product icon representing the director for which a
configuration file is to be backed up, then select Element Manager
from the pop-up menu. The application opens.
3. Select the Backup & Restore Configuration option from the
Maintenance menu. The Backup and Restore Configuration dialog
box displays (Figure 4-62).
Figure 4-62 Backup and Restore Configuration Dialog Box
4. Click Backup. An Information dialog box displays, indicating the
backup operation was initiated (Figure 4-63).
Figure 4-63 Information Dialog Box
5. Click OK to complete the backup and close the dialog box.
Restore the
Configuration
To restore the director configuration file from the management server
using the Intrepid 6064 Element Manager application:
1. Notify the customer the director will be set offline. Ensure the
customer system administrator quiesces Fibre Channel frame
traffic through the director and sets attached devices offline.
2. Set the director offline (Set the Director Online or Offline on
page 4-43).
3. At the management server, open the SAN management
application (SANavigator or EFCM).
4. At the SAN management application physical map, right-click
the product icon representing the director for which a
configuration file is to be restored, then select Element Manager
from the pop-up menu. The application opens.