FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

5-4

Intrepid® 6064 Director Installation and Service Manual

Removal and Replacement Procedures (RRPs)

Figure 5-2 ESD Grounding Point (Rear)

Concurrent FRUs

Table 5-2 lists the concurrent FRUs. Concurrent FRUs are removed

and replaced while the director is powered on and operational. The

table also lists ESD precautions (yes or no) for each FRU, and

references the page number of the removal and replacement

procedure.

Table 5-2 Concurrent FRUs

Concurrent FRU Name ESD Precaution Requirement Page

Cable management assembly No 5-5

Control processor (CTP2) card Yes 5-7

Universal port module (UPM) card Yes 5-11

10 Gbps port module (XPM) card Yes 5-11

Small form factor pluggable (SFP) optical transceiver Tes 5-17

10 Gbps form factor pluggable (XFP) optical

transceiver

Yes 5-17

UPM filler blank No 5-20

XPM filler blank No 5-20

Power supply Yes 5-22