FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

A
A-2
Intrepid® 6064 Director Installation and Service Manual
Messages
Action Click Ye s to confirm activating the new address configuration or No to
cancel the operation.
Message All configuration names must be unique.
Description All address configurations must be saved with unique names.
Action Save the configuration with a different name that is unique to all
saved configurations.
Message: All FPM ports will be held inactive while the director is configured
to 2 Gb/sec speed. Do you want to continue?
Description: Occurs when FPM cards are installed in the director and director
speed is being set to 2 Gb/sec in the Configure Operating Parameters
dialog box.
Action: Replace FPM cards with UPM cards (UPM cards operate at 1 and 2
Gb/sec) or set the director speed to 1 Gb/sec.
Message All port names must be unique.
Description A duplicate port name was entered. Every configured port name
must be unique.
Action Reconfigure the port with a unique name.
Message Another Element Manager is currently performing a firmware
install.
Description Only one firmware install to a specific director or switch can take
place at a time.
Action Wait for the firmware install to complete and retry the operation.