FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

A
Intrepid 6064 Element Manager Messages
A-9
Messages
Message: Cannot set all ports to 2Gb/sec due to port speed restriction on
some ports.
Description: Displays if all ports are set to 2 Gb/sec through the Configure Ports
dialog box and some ports do not support speed configuration.
Action: Replace ports that do not support speed configuration (FPM cards)
with those that support more than one speed configuration (UPM
cards).
Message: Cannot set all ports to Negotiate due to port speed restriction on
some ports.
Description: Displays if all ports are set to Negotiate through the Configure Ports
dialog box and some ports do not support speed configuration.
Action: Replace ports that do not support speed configuration (FPM cards)
with those that support more than one speed configuration (UPM
cards).
Message Cannot set Fibre Channel parameters.
Description Fibre Channel parameters cannot be set. The link is down or busy.
Action Retry the operation later. If the condition persists, contact support
personnel and report the problem.
Message Cannot set switch date and time.
Description The director or switch date and time cannot be set. The link is down
or busy.
Action Retry the operation later. If the condition persists, contact support
personnel and report the problem.
Message Cannot set switch state.
Description The director or switch state cannot be set. The link is down or busy.
Action Retry the operation later. If the condition persists, contact support
personnel and report the problem.