FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

A
A-12
Intrepid® 6064 Director Installation and Service Manual
Messages
Message Could not remove dump files from server.
Description Dump files could not be removed from the server. The link may be
down, or the director or switch may be busy.
Action Retry the operation later. If the condition persists, contact support
personnel and report the problem.
Message Could not stop port diagnostics.
Description Port diagnostics could not be stopped. The link may be down or the
director may be busy.
Action Retry the operation later. If the condition persists, contact support
personnel.
Message Could not write firmware to flash.
Description Firmware could not be written to FLASH memory.
Action Try again. If problem persists, contact support personnel.
Message CUP name and port name are identical.
Description Within the address configuration, one or more of the port names are
the same as the CUP name.
Action Make sure all names are unique for the ports and CUP name.
D
Message Date entered is invalid.
Description Date is entered incorrectly.
Action Verify the number of days in the month entry is valid.