FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

A
A-20
Intrepid® 6064 Director Installation and Service Manual
Messages
Action Specify a valid port number, in the range 0 to the maximum number
of ports on the product minus one. For example, for a director with 64
ports, the valid port range is 0 to 63.
Message Invalid port swap.
Description Port swap selection is not allowed.
Action Ensure each port selected for swap has not been previously swapped.
Message Invalid response received from switch.
Description An error occurred and the director or switch returned an invalid
response.
Action Resend the firmware. If the condition persists, contact support
personnel and report the problem.
Message Invalid serial number for this feature key.
Description The director or switch serial number and the entered feature key do
not match.
Action Ensure that the entered feature key corresponds to the director or
switch serial number.
Message Invalid UDP port number.
Description The user datagram protocol (UDP) port number must be an integer
from 1 through 65535.
Action Enter a port number from 1 through 65535.
Message Invalid value for BB_Credit.
Description BB_Credit must be an integer from 1 through 60.
Action Enter a BB_Credit value from 1 through 60.