FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

A
A-24
Intrepid® 6064 Director Installation and Service Manual
Messages
Message McDATA SANtegrity binding feature not installed. Please contact
your sales representative.
Description A user selected Switch Binding from the Configure menu. This
selection is not supported because the SANtegrity binding feature is
not installed.
Action Install the optional SANtegrity binding feature key through the
Configure Feature Key dialog box before enabling switch binding.
N
Message Nickname already exists. Please use a different nickname.
Description The entered nickname already exists.
Action Specify a unique nickname.
Message No backup configuration available to restore.
Description A backup of the configuration is not on the management server hard
drive. A configuration restore cannot be completed.
Action Select Backup and Restore Configuration from the Maintenance Menu
and select Backup to create a backup configuration file.
Message No file was selected.
Description A required file was not selected before an action was performed.
Action Select the required file and retry the operation.
Message No firmware version file was selected.
Description A firmware file was not selected in the Firmware Library dialog box
before an action was performed.
Action Select a firmware version and perform the action again.