FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

A
Intrepid 6064 Element Manager Messages
A-29
Messages
T
Message The add firmware process has been aborted.
Description User has ended the add firmware process.
Action Information message - no action required.
Message The data collection process failed.
Description An error occurred in the data collection procedure.
Action Contact support personnel and report the problem.
Message The data collection process has been aborted.
Description User has ended the data collection process.
Action Information message - no action required.
Message The default zone must be disabled to configure.
Description A user attempted to change the switch interoperability mode to Open
Fabric Mode with the default zone enabled.
Action Disable the default zone and repeat the operation.
Message The management server is busy processing a request from another
Element Manager.
Description The management server could not process the current request
because it is busy handling a request from another Element Manager.
Action Retry the operation later. If the condition persists, contact support
personnel and report the problem.