FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

A
A-30
Intrepid® 6064 Director Installation and Service Manual
Messages
Message The Ethernet link dropped.
Description The Ethernet connection between the management server and the
director or switch is down or unavailable.
Action Establish and verify the network connection.
Message The firmware file is corrupted.
Description A firmware version file is corrupt.
Action Contact support personnel and report the problem.
Message The firmware version already exists.
Description This firmware version already exists in the database.
Action Information message - no action required.
Message The following parameters cannot be disabled while Enterprise
Fabric Mode is active: Insistent Domain ID, Rerouting Delay,
Domain RSCN’s.
Description A user attempted to disable one or more of these parameters at the
Configure Switch Parameters dialog box with the director or switch
online and Enterprise Fabric Mode (SANtegrity binding feature)
enabled.
Action Click Yes to continue and disable Enterprise Fabric Mode.
Message The IPL configuration cannot be deleted.
Description A user attempted to delete the IPL address configuration. This
operation is not allowed.
Action Cancel the operation.