FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

A
Intrepid 6064 Element Manager Messages
A-31
Messages
Message The link to the switch is not available.
Description The Ethernet director (or switch)-to-management server link is not
available.
Action Check the Ethernet connection. If the condition persists, contact
support personnel and report the problem.
Message The maximum number of address configurations has been reached.
Description The maximum number of address configurations that can be saved to
the management server was reached.
Action Delete configurations no longer needed to allow one or more new
address configurations to be saved.
Message The optical transceiver is not installed.
Description Information is not available for a port without an optical transceiver
installed.
Action Install an SFP optical transceiver in the port.
Message The switch did not accept the request.
Description The director or switch was not able to perform the requested action.
Action Retry the operation later. If the condition persists, contact support
personnel and report the problem.
Message The switch did not respond in the time allowed.
Description The director or switch did not respond in the time allowed, causing a
time out.
Action Retry the operation later. If the condition persists, contact support
personnel and report the problem.