Manualshelf

FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

ManualsBrandsHP ManualsStorageHP StorageWorks Director 2/64 base 32 port config
51525354555657585960
Installation Tasks
2-1
2
Installation Tasks
This chapter describes tasks to install, configure, and verify operation
of the Intrepid 6064 Director, management server, and SANpilot
interface. The director can be mounted in a McDATA FC-512
Fabricenter equipment cabinet, in a standard 19-inch equipment
rack, or on a table top.
Factory Defaults
Table 2-1 lists the defaults for the Intrepid 6064 Director.
Table 2-1 Factory-Set Defaults (Intrepid 6064 Director)
Item Default
Customer-level password (maintenance port access) password
Maintenance-level password (maintenance port access) level-2
SANpilot interface user name (case sensitive) Administrator
SANpilot interface password (case sensitive) password
IP address 10.1.1.10
Subnet mask 255.0.0.0
Gateway address 0.0.0.0