FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

B
Port Card (UPM and XPM) Events (500 through 599)
B-57
Event Code Tables
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
✔✔✔✔✔✔
Event Code: 510
Message: SFP/XFP optical transceiver hot-insertion initiated.
Severity: Informational.
Explanation: Installation of an SFP or XFP optical transceiver was initiated with the director powered on and operational. The
event indicates that operational firmware detected the presence of the transceiver.
Action: No action required.
Event Data: Byte 0 = port number.
Byte 2 = type of optics: Bit 1 = SFP; Bit 2 = XFP.
Bytes 4 - 7 = elapsed millisecond tick count.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
✔✔