FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

2-4

Intrepid® 6064 Director Installation and Service Manual

Installation Tasks

Table 2-3 Installation Task Summary

Task Number and Description Required or Optional Page

Task 1: Verify Installation Requirements. Required. 2-8

Task 2: Install the Ethernet Hub. Optional - perform this task only if the hub is required

to connect the director to the management server or to

the Internet (SANpilot interface).

2-9

Task 3: Install the Director. Required. 2-12

Subtask A: Unpack and Inspect the Director Required - if not installed in equipment cabinet. 2-12

Subtask B: Rack-Mount Installation Required - if not installed in equipment cabinet. 2-13

Subtask C: Turn-on Director Power Required. 2-13

Task 4: Configure Director Network Information. Configure if connecting multiple directors (not in a

Fabricenter cabinet) or if connecting a director and

management server to a public LAN.

2-15

Subtask A: Set Network Addresses (IP Address, Subnet

mask, Gateway Address)

Configure if connecting multiple directors (not in a

Fabricenter cabinet) or if connecting a director and

management server to a public LAN.

2-15

Subtask B: LAN-Connect the Director. Configure if connecting multiple directors (not in a

Fabricenter cabinet) or if connecting a director and

management server to a public LAN.

2-19

Task 5: Install the Management Server. Required if the management server is installed. 2-20

Task 6: Configure the Management Server. Required if the management server is installed. 2-23

Subtask A: Configure Password and Network Addresses Required if the management server is installed. 2-23

Subtask B: Configure Management Server Information. Required if the management server is installed. 2-25

Subtask C: Configure Windows 2000 Users. Required if the management server is installed. 2-31

Subtask D: Set Management Server Date and Time. Required if the management server is installed. 2-36

Subtask E: Configure the Call-Home Feature. Optional - configure if specified by the customer and a

telephone connection is provided.

2-38

Subtask F: Record or Verify Management Server

Restore Information

Required if the management server is installed. 2-39

Task 7: Configure Director to the SAN Management

Application.

Required if the management server is installed. 2-39