FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

B
SBAR Events (600 through 699)
B-67
Event Code Tables
Event Code: 603
Message: SBAR hot-removal completed.
Severity: Informational.
Explanation: An SBAR was removed with the director powered on and operational.
Action: No action required.
Event Data: Byte 0 = SBAR slot position.
Bytes 4 - 7 = elapsed millisecond tick count.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
✔✔
Event Code: 604
Message: SBAR failure.
Severity: Major.
Explanation: The indicated SBAR failed. If the active SBAR fails, the backup SBAR takes over operation. If the backup SBAR
fails, the active SBAR is not impacted.
Action: Replace the failed SBAR with a functional assembly. Perform the data collection procedure and return the CD
and faulty assembly to McDATA support personnel.
Event Data: Byte 0 = SBAR slot position.
Byte 1 = engineering failure reason code.
Bytes 4 - 7 = elapsed millisecond tick count.
Bytes 8 - 11 = event code specific data.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
✔✔✔✔✔✔