FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

E
E-2
Intrepid® 6064 Director Installation and Service Manual
Restore Management Server
• SAN management data directory backup on CD-ROM - The
SAN management data directory is automatically backed up to a
CD when the management server is rebooted or when the data
directory contents change. The data directory includes:
— All configuration data (product definitions, user names,
passwords, user rights, nicknames, session options, SNMP
trap recipients, E-mail recipients, and Ethernet event
notifications).
— All log files (SAN management application and Element
Manager logs).
— Zoning library (all zone set and zone definitions).
— Firmware library.
— Call-home settings.
— Configuration data for each managed Intrepid 6064 Director
(stored on the server and in NV-RAM on each director or
switch).
• Windows 2000 configuration information - Windows 2000
network addresses, date and time information, user information,
and the product identification are recorded during installation of
the management server (Subtask F: Record or Verify Management
Server Restore Information on page 2-39).
Restore Management Server Procedure
To restore the rack-mount management server:
1. At the server, press the left edge (PUSH label) of the LCD panel to
disengage the panel and expose the CD-RW drive.
2. Insert the Management Server Restore CD-ROM in the CD-RW
drive and close the LCD panel.
ATTENTION! This procedure deletes all data from the C: hard drive
partition.
3. Press the power ( ) button. The server powers on and performs
a restore from the CD-ROM.