FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

Intrepid® 6064 Director Installation and Service Manual
vi
Contents
Task 1: Verify Installation Requirements.......................................2-8
Task 2: Install the Ethernet Hub......................................................2-9
Task 3: Install the Director.............................................................2-12
Subtask A: Unpack and Inspect the Director ......................2-12
Subtask B: Rack-Mount Installation......................................2-13
Subtask C: Turn-on Director Power......................................2-13
Task 4: Configure Director Network Information......................2-15
Subtask A: Set Network Addresses (IP Address, Subnet
mask, Gateway Address) .......................................................2-15
Subtask B: LAN-Connect the Director..................................2-19
Task 5: Install the Management Server........................................2-20
Task 6: Configure the Management Server.................................2-23
Subtask A: Configure Password and Network Addresses2-23
Subtask B: Configure Management Server Information....2-25
Subtask C: Configure Windows 2000 Users........................2-31
Subtask D: Set Management Server Date and Time...........2-36
Subtask E: Configure the Call-Home Feature .....................2-38
Subtask F: Record or Verify Management Server Restore In-
formation ..................................................................................2-39
Task 7: Configure Director to the SAN Management Application.
2-39
Subtask A: Assign User Names and Passwords to SAN Man-
agement Application...............................................................2-39
Subtask B: Identify the Director to the SAN Management Ap-
plication ....................................................................................2-42
Subtask C: Verify Director-to-SAN Management Application
Communication .......................................................................2-43
Subtask D: Configure Feature Key........................................2-45
Subtask E: Configure Open Systems Management Server
(OSMS) or FICON Management Server (FMS)...................2-46
Configure OSMS......................................................................2-46
Configure FMS (FICON) ........................................................2-47
Task 8: Configure the Director at the Element Manager
Application ......................................................................................2-48
Subtask A: Set Director Date and Time...............................2-50
Subtask B: Configure Director Identification ......................2-51
Subtask C: Configure Director Management Style.............2-52
Subtask D: Configure Director Parameters .........................2-53
Subtask E: Configure Fabric Parameters..............................2-55
Subtask F: Configure Preferred Paths ..................................2-57
Subtask G: Configure Switch Binding..................................2-59
Subtask H: Configure Director Ports....................................2-63
Subtask I: Configure SNMP Trap Message Recipients ......2-66