FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

Intrepid® 6064 Director Installation and Service Manual
i-2
Index
port statistics 4-24
clear system error light function 1-5
clearances, Fabricenter cabinet C-3
Code of Federal Regulations 1-7
laser compliance -xxvi
code page table 2-48
command line interface
disable at SANpilot 2-97
enable at SANpilot 2-97
community name field 2-67
COMn properties dialog box 2-16
concurrent FRUs table 5-4
configuration data
backing up 2-78
managing 4-75
configure
bb_credit 2-55
call-home feature 2-38
director date and time 2-88
director identification 2-51, 2-86
director network information 2-94
director operating parameters 2-89
director, from SANpilot 2-80
e_d_tov 2-55
e-mail notification 2-73
ethernet events 2-75
fabric binding 2-106
fabric parameters 2-91
feature key 2-45, 2-111
FMS 2-47
management server DNS domain name 2-25
management server IP address 2-23
management server password 2-23
management server subnet mask 2-23
network addresses, maintenance port 1-11
OpenTrunking 2-71, 2-108
operating mode 2-52
operating parameters 2-53, 2-55
OSMS 2-46, 2-98
password 2-99
port binding 2-66, 2-100
ports 2-63, 2-84
r_a_tov 2-55
SNMP 2-95
SNMP trap message recipients 2-66
switch binding 2-101
user name 2-99
users dialog box 2-40
Windows 2000 users 2-31
zone sets 2-114
zones 2-113
connect to dialog box 2-16
connecting, director to fabric 2-118
connection description dialog box 2-16
counter 4-25
CTP2 card
description 1-5
event codes tables B-36
failover 1-6
firmware versions 4-56
FLASH memory 4-39
IML button 1-5
LEDs 1-7
MAP 3-75
NV-RAM, backing up 4-75
removing and replacing 5-7
customer checklist for fault isolation 3-9
customer-supplied equipment rack 2-3
D
danger statements, list of -xxviii
data collection procedure
management server 4-40
SANpilot 4-41
date and time
setting 2-50, 2-88
synchronizing 2-51
default
director priority 2-56
DNS server IP address 2-39
EFC Manager password 4-89
EFC manager password 2-80
EFC Manager user name 4-89
EFC manager user name 2-80
loop mode 2-92
resetting 4-77
SAN management application password E-7
SAN management application user name E-7
SANpilot password 2-83
SANpilot user name 2-83
TightVNC password 2-26, 2-80, 4-88, E-5
Windows 2000 password 2-27, 2-80, 4-89, E-6