FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

i-7
Index
Index
switch binding membership 2-102
logic cards, torque tool, caution 1-16
logs
audit
director 4-6
EFC manager 4-4
event
director 4-6
EFC manager 4-4
fabric 4-6
hardware 4-8
link incident 4-9
list of 4-3
product status 4-5
session 4-5
loop modes, default 2-92
loopback plug
multimode 1-16
singlemode 1-16
loopback test
external 4-32, 4-36
internal 4-31, 4-34
name server zoning, caution 4-33
performing 4-30
M
maintenance analysis procedures
See MAPs
maintenance data, collecting 4-39
maintenance port 1-11
management server
configure 2-46
date and time, setting 2-36
description D-1
director, verifying communication 2-43
ethernet link, MAP 3-57
event log B-1
fault isolation
MAP 3-9
Fibre Alliance MIB 1-14
inspecting 2-20, 2-23
installation tasks, summary 2-3
installing 2-20, 2-23
restore information, recording and verifying
2-39
restore procedure E-2
restore requirements E-1
session log 4-5
specifications D-2
unpacking 2-20, 2-23
managing
configuration data 4-75
director 1-18
MAPs 3-1
MAP 0000-Start Map 3-9
MAP 0100-Power Distribution Analysis 3-34
MAP 0200-POST Failure Analysis 3-44
MAP 0300-Console Application Problem
Determination 3-49
MAP 0400-Loss of Console Communication
3-57
MAP 0500-FRU Failure Analysis 3-75
MAP 0600-Port Card Failure and Link
Incident Analysis 3-83
MAP 0700-Fabric, ISL, and Segmented Port
Problem Determination 3-105
MAP 0800-Console PC Problem
Determination 3-121
quick start 3-2
summary table 3-2
McDATA
home page
firmware versions 4-57
warranty -xxvii
membership list
switch binding 2-102
messages
element manager A-1
MIBs 1-14
mounting brackets, installing 2-13
multiswitch fabric
e_port segmentation
reasons for 4-22
N
network address, product status log 4-6
network information
configure director at SANpilot 2-94
configure management server 2-23
new product dialog box 2-42
nonconcurrent FRUs table 5-5
null modem cable 1-17