FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

Intrepid® 6064 Director Installation and Service Manual
i-8
Index
NV-RAM, backing up 4-75
O
OFC class 1 laser transceivers 1-7
offline state
set from SANpilot 4-45
offline state, setting 4-44
online state
set from SANpilot 4-45
online state, setting 4-44
open systems management server
See OSMS
open systems mode
OSMS, configure 2-46
OpenTrunking
configure at management server 2-71
configure at SANpilot 2-108
operating environment, director C-2
operating mode
configure 2-52
operating parameters
configure at SANpilot 2-89
operating parameters, configure 2-53, 2-55
OSI devices, communication 2-52
OSI server 2-46
OSMS 2-45
configure 2-46, 2-98
P
part numbers
front-accessible FRUs 6-2
rear-accessible FRUs 6-4, 6-5
password
configure at SANpilot 2-99
default 2-1, 3-2, 4-2, 5-1
default EFC Manager 4-89
default EFC manager 2-80
default SAN management application E-7
default SANpilot 2-83
default TightVNC 2-26, 2-80, 4-88, E-5
default Windows 2000 2-27, 2-80, 4-89, E-6
performance statistics
Class 2 4-18
Class 3 4-18
error 4-18
operational 4-20
traffic 4-20
physical characteristics, director C-1
planning tasks 2-8
installation requirements, verifying 2-8
port
clear statistics 4-24
port binding
configure 2-66, 2-100
description 2-100
port card
external loopback test 4-32
internal loopback test 4-31
operational states 4-13
port list view 4-15
port loopback diagnostic tests, fiber-optic
loopback plug 1-16
port operational states table 4-13
port properties dialog box 4-16, 4-20
port settings parameters 2-17
ports
blocking 4-46
configure at management server 2-63
configure at SANpilot 2-84
diagnostics, performing 4-13
fibre channel, cabling 2-113
operational states, list of 4-13
performance statistics 4-24
port properties 4-28
port technology 4-22, 4-28
unblocking 4-48
POSTs
LEDs 2-14
MAP 3-44
power cords
illustrations 6-6
power distribution system MAP 3-34
power module assembly 1-11
removing and replacing 5-33
power receptacles, illustrations 6-6
power requirements, director C-1
power supplies 1-10
accessing 1-5
LEDs 1-11
removing and replacing 5-22
power supply events, event codes tables B-24
power switch 1-11
power-off procedure 4-53