FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

2
Task 6: Configure the Management Server
2-25
Installation Tasks
Configure Public LAN Addresses
To configure TCP/IP network information for the public LAN
connection (LAN 1):
1. At the management server LCD panel, press ENTER. The
Welcome!! or operational information message changes to the
Input Password panel.
2. Use the arrow keys to input the default or changed password and
press ENTER. The LAN 1 Setting?? message appears.
3. Press ENTER and the following message appears (Figure 2-13).
Figure 2-13 LCD Panel (LAN 1 IP Address)
4. Use the arrow keys to input a new IP address and press ENTER.
The Save Change panel appears.
5. Press ENTER. The LAN 1 IP address changes and the following
message appears (Figure 2-14).
Figure 2-14 LCD Panel (LAN 1 Subnet Mask)
6. Use the arrow keys to input a new subnet mask and press
ENTER. The Save Change panel appears.
7. Press ENTER. A Wait a moment! message appears, the panel
returns to the LAN 1 Setting?? message, and the LAN 1 subnet
mask changes.
8. Record the public LAN IP address and subnet mask.
Subtask B: Configure Management Server Information
Configure the computer name and workgroup name for the
management server. Configure these parameters from the server
Windows 2000 operating system, using a LAN-attached PC with
standard web browser.
Input IP:
192.168.000.001
Input Netmask:
255.000.000.000