FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

Task 6: Configure the Management Server

2-29

Installation Tasks

Figure 2-19 Identification Changes Dialog Box

4. At the Computer Name field, change the name to MGMTSERVER,

at the Workgroup field, change the name to WORKGROUP, then

click OK. The dialog box closes.

5. Record the computer and workgroup names.

6. At the System Properties dialog box, click OK to close the dialog

box and return to the Control Panel window.

7. Click close (X) at the upper right corner of the Control Panel

window to return to the Windows 2000 desktop.

Configure Gateway and DNS Server Addresses

To configure gateway addresses and DNS server IP addresses for the

private LAN connection (LAN 2) and optional public LAN

connection (LAN 1):

1. At the Windows 2000 desktop, click Start at the left side of the

task bar (bottom of the desktop), then select Settings, then Control

Panel. The Control Panel window displays (Figure 2-18).

2. Double-click the Network and Dial-up Connections icon. The

Network and Dial-up Connections window displays.

3. To configure addresses for the private LAN connection (LAN 2),

double-click the Local Area Connection 2 icon. The Local Area

Connection 2 Properties dialog box displays.