FW 07.00.00/HAFM SW 08.06.00 McDATA Intrepid 6064 Director Installation and Service Manual (620-000108-920, April 2005)

Intrepid® 6064 Director Installation and Service Manual
viii
Contents
Factory Defaults.........................................................................3-2
Quick Start..................................................................................3-2
MAP 0000: Start MAP ......................................................................3-9
MAP 0100: Power Distribution Analysis ....................................3-34
MAP 0200: POST Failure Analysis...............................................3-44
MAP 0300: Server Application Problem Determination...........3-49
MAP 0400: Loss of Server Communication ................................3-57
MAP 0500: FRU Failure Analysis.................................................3-75
MAP 0600: Port Card Failure and Link Incident Analysis .......3-83
MAP 0700: Fabric, ISL, and Segmented Port Problem
Determination ...............................................................................3-105
MAP 0800: Server Hardware Problem Determination............3-121
Chapter 4 Repair Information
Factory Defaults.........................................................................4-2
Procedural Notes .......................................................................4-2
Obtaining Log Information .............................................................4-3
SAN Management Logs............................................................4-4
Element Manager Logs.............................................................4-6
SANpilot Logs..........................................................................4-11
Obtaining Port Diagnostic Information.......................................4-13
Port LEDs..................................................................................4-13
Management Server ................................................................4-15
SANpilot Interface...................................................................4-23
Performing Port Diagnostic Loopback Tests ..............................4-30
Internal Loopback Test (Management Server) ....................4-31
External Loopback Test (Management Server) ...................4-32
Internal Loopback Test (SANpilot Interface).......................4-34
External Loopback Test (SANpilot Interface)......................4-36
Performing Channel Wrap Tests (FICON)..................................4-37
Swapping Ports (FICON) ..............................................................4-38
Collecting Maintenance Data........................................................4-39
Management Server ................................................................4-40
SANpilot Interface...................................................................4-41
Set the Director Online or Offline.................................................4-43
Set Online State (Management Server).................................4-44
Set Offline State (Management Server) ................................4-44
Set Online State (SANpilot Interface)...................................4-45
Set Offline State (SANpilot Interface)...................................4-45
Blocking and Unblocking Ports....................................................4-46
Block a Port
(Management Server)..............................................................4-46