FW 07.01.02/HAFM SW 08.06.00 HP StorageWorks Director Release Notes (AA-RTDVH-TE, August 2005)

• FCEOS MIB: 2.0
• SNMP Framework MIB: RFC-2 271 (199 7/09/30)
• FA MIB: 3.0
• FA MIB: 3.1
SNMP requests can b e received in either 3.0 or 3.1 of the Fibre Alliance (FA) MIB, and
the switch responds in the same version. The switch can also be configured to use a
specific version for traps generated by the switch.
Zoning limitations
With firmware 06.00.00 and later, you have the ability to configure large zone sets,
including up to
1024 zones and 1024 end ports in a single zone set. Table 3 shows
the supported
limits for the edg e switches and directors.
Table 3 Zoning parameters supported limits
Zoning parame
ter
Maximum value
Number of zone members in a zone
2048
Number of zones in a zone set
1024
Number of uniq
ue zone members in a zone set
2048
Total number of zone members in a zone set (where a zone
membercanbeinmultiplezones)
4096
Characters per zoning name
32
Number of unique zone members in HAFM Zoning Library
2048
Number of zones in HAFM Zoning Library
1024
Number of zone sets in HAFM Zoning Library
64
Number of end ports
1024
Number of devices supported (including loop devices)
1024
Using the same firmw are
All directors and edge switches in the same fabric should have the same firmware lev el
installed—whether 1 Gbps or 2 Gbps capable, this firmware o perates correctly.
The recentl
y released Edge Switch 2/12 had an interim firmware specificfortheEdge
Switch 2/1
2, 05.05.00-12. This firmwarecannotbeusedforanyotheredgeswitch
or directo
r. This interim version is compatible with the M-Series firmware 05. 02.00-13
used for the rest of the M-Series fabric products. The firmware 07.01.02-4 is a common
firmware for all the M-Series fabric products, including the Edge Switch 2/12.
18