Manualshelf

FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

ManualsBrandsHP ManualsStorageHP StorageWorks Director 2/64 base 32 port config
101102103104105106107108109110
CLI Commands
102 CLI Reference Guide for Directors and Edge Switches
Syntax
bbCredit bbCreditValue
Purpose
This command sets the buffer-to-buffer credit value for all ports, except those
ports configured for extended distance. (The Edge Switch 2/24 does not accept
this command.)
Description
The switch must be set offline before this command is entered.
Parameters
This command has one parameter:
Command Example
Root> config switch bbCredit 2
config.switch.bbCredit
bbCreditValue Specifies the new buffer-to-buffer credit value.
This parameter must be an integer in the range
1–60.