Manualshelf

FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

ManualsBrandsHP ManualsStorageHP StorageWorks Director 2/64 base 32 port config
101102103104105106107108109110
config.switch.ltdFabRSCN
105CLI Reference Guide for Directors and Edge Switches
Syntax
ltdFabRSCN ltdFabRSCNState
Purpose
This command sets the status of limited fabric RSCNs. When enabled, fabric
register for state change notifications (RSCNs) are suppressed during an IPL.
Description
The switch must be set offline before this command is entered.
Parameters
This command has one parameter.
Command Example
Root> config switch ltdFabRSCN 1
config.switch.ltdFabRSCN
ltdFabRSCNState Specifies whether the limited fabric RSCN state is
enabled. Valid values are enable and disable.
Boolean 1 and 0 may be substituted as values.