Manualshelf

FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

ManualsBrandsHP ManualsStorageHP StorageWorks Director 2/64 base 32 port config
101102103104105106107108109110
config.switch.interopMode
107CLI Reference Guide for Directors and Edge Switches
Syntax
interopMode interopMode
Purpose
This command sets the interoperability mode for the switch. The switch must be
offline to complete this command.
Description
The switch must be set offline before this command is entered.
Parameters
This command has one parameter:
Command Example
Root> config switch interopMode open
config.switch.interopMode
interopMode Specifies the interoperability mode.
Valid values are:
■ mcdata (for Homogenous Fabric mode)
■ open (for Open Fabric 1.0 mode)