FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

config.switch.raTOV
111CLI Reference Guide for Directors and Edge Switches
Syntax
raTOV timeoutValue
Purpose
This command sets the R_A_TOV for the switch.
Description
The switch must be set offline before this command is entered.
Special care should be used when scripting this command due to its relationship
with E_D_TOV.
Parameters
This command has one parameter:
Command Example
Root> config switch raTOV 20
config.switch.raTOV
timeoutValue Specifies the new R_A_TOV value.
The units for this value are tenths of a second.
This parameter must be an integer in the range
10–1200 (1 second to 120 seconds), and must be
larger than the E_D_TOV.