FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
128 CLI Reference Guide for Directors and Edge Switches
Syntax
activateZoneSet
Purpose
This command activates the zone set contained in the work area to the fabric and
takes effect immediately.
Description
This command takes effect immediately in the fabric.
Parameters
This command has no parameters.
Command Example
Root> config zoning activateZoneSet
Note: If the interoperability mode for the switch or director is set to Open Fabric 1.0
mode when the zone is activated, any zone members specified by port number are
ignored.
config.zoning.activateZoneSet