FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

config.zoning.deactivateZoneSet
129CLI Reference Guide for Directors and Edge Switches
Syntax
deactivateZoneSet
Purpose
This command places all attached devices in the default zone if the default zone is
enabled and takes effect immediately for the entire fabric. If the default zone is
not enabled, there will be no zoning in effect and all attached devices will be
unable to communicate with any other attached device. This command clears both
the active zone set and the working area.
Description
The default zone must be activated independently of this command.
Note: This command takes effect immediately in the fabric.
Parameters
This command has no parameters.
Command Example
Root> config zoning deactiveZoneSet
config.zoning.deactivateZoneSet