FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
132 CLI Reference Guide for Directors and Edge Switches
Syntax
addZone “zoneName”
Purpose
This command adds a new (empty) zone to the zone set in the work area. (A
switch or director can have a maximum of 1024 zones.)
Description
Changes are not activated on the switch until the
config.zoning.activateZoneSet command is issued.
Parameters
This command has one parameter:
Command Example
Root> config zoning addZone TheUltimateZone
config.zoning.addZone
zoneName Specifies the name of the new zone.
The zoneName must contain 1–64 characters.
Valid characters are:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrs
tuvwxyz0123456789$-^_
Spaces are not permitted, and the first character must be
alphabetical.