FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
134 CLI Reference Guide for Directors and Edge Switches
Syntax
renameZoneSet “zoneSetName”
Purpose
This command changes the name of the zone set in the work area.
Description
Changes are not activated on the switch until the
config.zoning.activateZoneSet command is issued.
Parameters
This command has one parameter:
Command Example
Root> config zoning renameZoneSet TheUltimateZoneSet
config.zoning.renameZoneSet
zoneSetName Specifies the new name for the zone set.
The zoneSetName must contain 1–64 characters.
Valid characters are:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmno
pqrstuvwxyz0123456789$-^_
Spaces are not permitted, and the first character must be
alphabetical.