FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

config.zoning.deleteWwnMem
139CLI Reference Guide for Directors and Edge Switches
Syntax
deleteWwnMem “zoneName” wwn
Purpose
This command removes a WWN member from a zone that is in the work area.
Parameters
This command has two parameters:
Command Example
Root> config zoning deleteWwnMem TheNotSoUltimateZone
10:00:00:00:C9:22:9B:AB
config.zoning.deleteWwnMem
zoneName Specifies the name of the zone that contains the member to
be deleted.
wwn Specifies the World Wide Name of the member to be
deleted from the zone.
The value of the WWN must be in colon-delimited
hexidecimal notation.
For example: AA:00:AA:00:AA:00:AA:00.