FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
140 CLI Reference Guide for Directors and Edge Switches
Syntax
deletePortMem “zoneName” domainId portNumber
Purpose
This command deletes a domain ID and port number for a zone member in the
specified zone in the work area.
Parameters
This command has three parameters:
Command Example
Root> config zoning deletePortMem TheUltimateZone 10 5
config.zoning.deletePortMem
zoneName Specifies the name of the zone that contains the member to
be deleted.
domainId Specifies the domain ID of the member to be deleted from
the zone.
Valid domain IDs are in the range 1–31.
portNumber Specifies the port number of the member to be deleted
from the zone.
Valid port numbers values are:
0–11 for the Edge Switch 2/12
0–15 for the Edge Switch 2/16
00–23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–143 for the Director 2/140