FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

config.zoning.renameZone
141CLI Reference Guide for Directors and Edge Switches
Syntax
renameZone “oldZoneName” “newZoneName”
Purpose
This command renames a zone in the work area.
Parameters
This command has two parameters:
Command Example
Root> config zoning renameZone TheOldUltimateZone
TheUltimateZone
config.zoning.renameZone
oldZoneName Specifies the current zone name of the zone to
be renamed.
newZoneName Specifies the new zone name. The
newZoneName must contain 1–64 characters.
Valid characters are:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcde
fghijklmnopqrstuvwxyz$-^_
Spaces are not permitted, and the first character
must be alphabetical.