FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

config.zoning.showActive
143CLI Reference Guide for Directors and Edge Switches
Syntax
showActive
Purpose
This command shows the zoning configuration saved on the fabric.
Parameters
This command has no parameters.
Command Example
Root> config zoning showActive
Output
The zoning configuration data is displayed as a table that includes the following
properties:
Output Example
The output from the config.zoning.showActive command displays as
follows.
Active Zone Set
Default Zone Enabled: False
ZoneSet: TheUltimateZoneSet
Zone: TheUltimateZone
ZoneMember: Domain 10, Port 6
ZoneMember: Domain 15, Port 2
ZoneMember: Domain 2, Port 63
ZoneMember: 10:00:00:00:C9:22:9B:64
ZoneMember: 10:00:00:00:C9:22:9B:BD
Zone: TheNotSoUltimateZone
ZoneMember: 10:00:00:00:C9:22:9B:AB
ZoneMember: 10:00:00:00:C9:22:9B:C6
ZoneMember: 10:00:00:00:C9:22:9B:AB
Zone: TheNotUltimateAtAllZone
ZoneMember: Domain 2, Port 63
config.zoning.showActive
Active ZoneSet The enabled status, name, and member zones of the
zone set.