FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
146 CLI Reference Guide for Directors and Edge Switches
Syntax
reset portNumber
Purpose
This command resets a port.
Description
This command resets an individual port without affecting any other ports.
However, if a device is attached to the port and the device is online, the reset
causes a link reset to occur. If the port is in a failed state (that is, after failing a
loopback test), the reset restores the port to an operational state. The reset also
clears all statistics counters and disables port beaconing for the specified port.
Parameters
This command has one parameter:
Command Example
Root> maint port reset 4
maint.port.reset
portNumber Specifies the port number to be reset.
Valid values are:
0–11 for the Edge Switch 2/12
0–15 for the Edge Switch 2/16
0–23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–143 for the Director 2/140