Manualshelf

FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

ManualsBrandsHP ManualsStorageHP StorageWorks Director 2/64 base 32 port config
151152153154155156157158159160
CLI Commands
158 CLI Reference Guide for Directors and Edge Switches
Syntax
errors portNumber
Purpose
This command displays port error counters for a single port.
Parameters
This command has one parameter:
Command Example
Root> perf errors 2
Output
The port error counter data is displayed as a table that includes the following
statistics:
perf.errors
portNumber Specifies the port number.
Valid values are:
0–11 for the Edge Switch 2/12
0–15 for the Edge Switch 2/16
0-23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–143 for the Director 2/140
Port The port number.
Prim Seq Err The number of state machine protocol errors
detected by the port hardware.