FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

perf.openTrunking.congestionThresh
163CLI Reference Guide for Directors and Edge Switches
Syntax
congestionThresh portNumber congestionThreshold
Purpose
This command configures the congestion threshold for an individual port or for all
ports.
Parameters
This command has the following parameters:
Command Example
Root> perf openTrunking congestionThresh 8 20
perf.openTrunking.congestionThresh
portNumber Specifies the port number. Valid values are:
0–11 for the Edge Switch 2/12
0–15 for the Edge Switch 2/16
0-23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–143 for the Director 2/140
all applies the congestionThreshold
value to every port on the product.
congestionThreshold Specifies the congestion threshold in terms of
a percentage. Valid values are integers in the
range 1 to 99 or default. Specifying the
value default sets the specified port to the
default threshold level of 10.