FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

perf.opentrunking.setState
165CLI Reference Guide for Directors and Edge Switches
Syntax
setState openTrunkingState
Purpose
This command sets the enabled state of the OpenTrunking feature. The
OpenTrunking feature key must be installed in order to enable open trunking.
Parameters
This command has one parameter.
Command Example
Root> perf opentrunking setState 1
Note: The command “config.features.opentrunking” on page 47 has functionality that
is identical to this command.
perf.opentrunking.setState
openTrunkingState This parameter can be set to enable or disable
the OpenTrunking feature. Boolean 1 and 0 may be
substituted as values.