FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
166 CLI Reference Guide for Directors and Edge Switches
Syntax
show portNumber
Purpose
This command displays the current OpenTrunking configuration per port.
Parameters
This command has one parameter:
Command Example
Root> perf openTrunking show 11
Output
The OpenTrunking configuration data is displayed as a table that includes the
following statistics:
perf.openTrunking.show
portNumber Specifies the port number. Valid values are:
0–11 for the Edge Switch 2/12
0–15 for the Edge Switch 2/16
0-23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–143 for the Director 2/140
Congestion Threshold The threshold listed as a percentage. If the
value is a default value, (default) is
displayed next to the percentage.
Flows Rerouted To Trunking statistic displaying flows rerouted to
the specified port. (These statistics are cleared
by the perf.clearStats command.)