FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

perf.preferredPath.clearPath
171CLI Reference Guide for Directors and Edge Switches
Syntax
clearPath destDomainID sourcePort
Purpose
This command deletes a preferred path. The command causes the specified path to
use a path selection algorithm that is different from the preferred path. All
configured paths can be removed by specifying the all parameter for both the
destination domain ID and source port.
Parameters
This command has the following parameters:
Command Example
Root> perf preferredPath clearPath 10 5
perf.preferredPath.clearPath
destDomainId Specifies the destination domain ID. Valid
domain IDs are in the range 1–31 or all,
which deletes all preferred paths to and from the
source port specified in the sourcePort
parameter.
sourcePort Specifies the number of the source port. Valid
port numbers values are:
0–11 for the Edge Switch 2/12
0–15 for the Edge Switch 2/16
0-23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–143 for the Director 2/140
Or you can specify all to delete all paths to the
destination domain ID.