Manualshelf

FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

ManualsBrandsHP ManualsStorageHP StorageWorks Director 2/64 base 32 port config
171172173174175176177178179180
CLI Commands
174 CLI Reference Guide for Directors and Edge Switches
Syntax
setState enabledState
Purpose
This command enables or disables the Preferred Path feature.
Note: Insistent domain IDs must be used in order to enable the preferred path state.
Parameters
This command has one parameter.
Command Example
Root> perf preferredPath setState enable
perf.preferredPath.setState
enabledState Sets the state of the preferred path
feature. When disabled, the preferred path
settings are ignored for all path selection
decisions. Accepted values for this
command are enable and disable.
Boolean 1 and 0 be substituted as values.