FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
186 CLI Reference Guide for Directors and Edge Switches
Syntax
removePort name portNumber
Purpose
This command removes a port from the specified counter threshold alert.
Note: An alert cannot be modified unless it is in the disabled state.
Parameters
This command has the following parameters:
Command Example
Root> perf thresholdAlerts counter removePort checklinks 12
perf.thresholdAlerts.counter.removePort
name The name of a counter threshold alert as
defined by the command
“perf.thresholdAlerts.counter.addAlert” on
page 183.
portNumber Specifies the port number. Valid values are:
0–11 for the Edge Switch 2/12
0–15 for the Edge Switch 2/16
0-23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–143 for the Director 2/140
all removes every port on the product from
the counter threshold alert.