FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
190 CLI Reference Guide for Directors and Edge Switches
Syntax
show name
Purpose
This command displays the settings for an individual counter threshold alert.
Parameters
This command has one parameter:
Note: The output of this command truncates threshold alert names that are longer
than 51 characters. If you specify lengthy names, you can display the complete name
by entering the comma-delimited mode using the commaDelim command.
Command Example
Root> perf thresholdAlerts counter show checklinks
Output Example
The output from the perf.thresholdAlerts.counter.show command
displays as follows.
Index: 3
Name: Example_CRC_Error_Finder
Ports: 2,4-7,20-24
Counter Statistic: CRC Errors
Increment: 5
Interval: 30
Alert State: Disabled
perf.thresholdAlerts.counter.show
name The name of a threshold alert as defined by the
command “perf.thresholdAlerts.counter.addAlert” on
page 183.