FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

perf.threshAlerts.counter.showStatisticTable
191CLI Reference Guide for Directors and Edge Switches
Syntax
showStatisticTable
Purpose
This command displays the table of different statistic counters that can be added
to a counter threshold alert. This table is used for reference only.
Parameters
This command has no parameters.
Command Example
Root> perf ThreshAlerts counter showStatisticTable
Output Example
The output from the
showStatisticTable command displays as follows.
NumberCounter or Counter Set
----------------------------
1 Link Resets Sent
2 Link Resets Received
3 OLS Sent
4 OLS Received
5 Link Failures
6 Sync Losses
7 Signal Losses
8 Protocol Errors
9 Invalid Tx Words
10 CRC Errors
11 Discarded Frames
12 Frames Too Short
13 Delimiter Errors
14 Address ID Errors
15 Cls2 BusiedFrms
16 Cls2 RejectedFrms
17 Cls3 DiscardFrms
18 Phys Lnk Err Set
19 Lnk Seq Cnt Set
20 Logic Lnk Err Set
21 LIPS Detected
22 Lips Generated
perf.threshAlerts.counter.showStatisticTable