FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
192 CLI Reference Guide for Directors and Edge Switches
Syntax
deleteAlert name
Purpose
This command deletes a specified threshold alert.
Note: An alert cannot be modified unless it is in the disabled state. Verify that the
alert is disabled before executing this command.
Parameters
This command has one parameter.
perf.thresholdAlerts.deleteAlert
name The name of a threshold alert as defined by the
commands perf.thresholdAlerts.counter.addPort
and perf.thresholdAlerts.throughput.addAlert,
or, enter all to delete all of the configured
threshold alerts.